top of page

EXTERNAL SEALANTS

Our external sealants provide reliable sealing of bullets and primers. An anaerobic, UV‑curing sealant (2-curing mechanism) is injected by Andre AdJet valve. Low viscosity and surface tension ensure complete gap penetration with immediate curing by UV lights.
The system is compatible with standard sealing machines without parameter changes.
Dosage is controlled by pneumatic pressure and jet timing. Multiple grades are available for different calibers, including tight or complex clearances (e.g. 0.50 BMG, tracer).
Very high yield: 1 liter can seal up to 1.4 million rounds of ammunition.

All sealants comply with AEP‑97 water tightness requirements and are fully compatible with propellant powders per STANAG 4147.

Contáctanos

+41 41 6110822

Contáctanos

Descarga del PDF

Descargar ahora

Descripción del Producto

Propiedades

Anaerobic and UV-curing

Solicitud

Bullet and primer sealing

Bandera

Red, Green, Blue, Yellow, Black, Clear

Brillo

​

Unidades de embalaje

250/500/900 ml

Producto USP

The USP of our colored sealants is the avoidance of pigments, which prevents the sealants from clogging the application valves. Shaking before use and inline-filter are no longer necessary. Only 2 hazard pictograms.
Reach and PFAS conform.

Datos técnicos

Property

Value

Viscosity

5-15 cP (mPas)

Colour Options

red, green, yellow, blue, black, clear

Fluorescent

yes, blue under UV light for optical control

Drying

anaerobic + UV-curing (2-curing mechanism)

Drying Time

2-3 sec (min. 3W/cm² LED lamp)

Anaerobic Fixture Time

< 2 min (brass)

UV Tack Free Time

< 3 sec

Full Strength Time

18 hours

Surface Tension

26-29 mN/m

Temperature Range

-55 to 210°C (-65 to 410°F)

Specific Gravity

0.92 to 1.04

Hardness Shore A (ASTM D2240)

27-64


Datos técnicos

​

When stored dry and cool, 1 year, closed drums longer

Contáctanos

Productos destacados

PRIMER VARNISH

AdJet Valve

EXTERNAL SEALANTS

bottom of page