
EXTERNAL SEALANTS
Our external sealants provide reliable sealing of bullets and primers. An anaerobic, UV‑curing sealant (2-curing mechanism) is injected by Andre AdJet valve. Low viscosity and surface tension ensure complete gap penetration with immediate curing by UV lights.
The system is compatible with standard sealing machines without parameter changes.
Dosage is controlled by pneumatic pressure and jet timing. Multiple grades are available for different calibers, including tight or complex clearances (e.g. 0.50 BMG, tracer).
Very high yield: 1 liter can seal up to 1.4 million rounds of ammunition.
All sealants comply with AEP‑97 water tightness requirements and are fully compatible with propellant powders per STANAG 4147.
Produktbeschreibung
Eigenschaften
Anaerobic and UV-curing
Anwendung
Bullet and primer sealing
Farben
Red, Green, Blue, Yellow, Black, Clear
Glanz
Verpackungseinheiten
250/500/900 ml
Produkt-USP
The USP of our colored sealants is the avoidance of pigments, which prevents the sealants from clogging the application valves. Shaking before use and inline-filter are no longer necessary. Only 2 hazard pictograms.
Reach and PFAS conform.
Technische Daten
Property | Value |
Viscosity | 5-15 cP (mPas) |
Colour Options | red, green, yellow, blue, black, clear |
Fluorescent | yes, blue under UV light for optical control |
Drying | anaerobic + UV-curing (2-curing mechanism) |
Drying Time | 2-3 sec (min. 3W/cm² LED lamp) |
Anaerobic Fixture Time | < 2 min (brass) |
UV Tack Free Time | < 3 sec |
Full Strength Time | 18 hours |
Surface Tension | 26-29 mN/m |
Temperature Range | -55 to 210°C (-65 to 410°F) |
Specific Gravity | 0.92 to 1.04 |
Hardness Shore A (ASTM D2240) | 27-64 |
Technische Daten



